2 Channel Controller
 
Home
2 Channel Controller
Dew-Not™ Specs
Order Dew-Not™

NEW! Dual Channel Controller

Microprocessor based dual channel controller

UL 94V0 enclosure

Zero to 100% output control per channel.

Two outputs per channel (may be increased using DNS splitter, sold separately)

10 amp capacity

6 foot power cord fused @ 10 amps

Virtually RFI free

Two stage low battery indicator:

  • If voltage drops to 11 volts the power led begins slow blinking as a low voltage warning.
     
  • If the battery voltage drops to 10.5 volts the power led starts fast blinking and the outputs turn off. When the voltage recovers to over 12 volts it will start operating again

The 10.5 volt threshold is to prevent permanent damage to battery packs.

Operating voltage is 12 volts.

Velcro provided for attachment

30 day warranty

Copyright © 2004-2013 Dew-Not, LLC. All Rights Reserved.